Technical Library
Apply
Filters
category:
content type:
Sort by:
Newest to Oldest
Newest to Oldest
Oldest to Newest
Third Order Intercept
Third order intercept or IP3 plays a significant role in device characterization and verifying RF performance. With the use of…
Power Calibration with Copper Mountain Technologies VNAs – Quick Start Guide
Performing amplifier, mixer, or other sensitive DUT measurements accurately and correctly depends on proper setup and appropriate calibration. Power calibration…
Automatic Fixture Removal Plug-in Method Selection
Automatic Fixture Removal (AFR) plug-in serves to simplify a device under test (DUT) measurement process based on a Vector Network…
Dual Band Measurements with a 4-Port VNA
The dual band measurement setup is ideal If you have a 4-port frequency extension compatible VNA and are working in…
Determining Resonator Q Factor from Return Loss Measurement Alone
It is not uncommon to want to measure the Q factor of a resonator. This might be to determine its…
Vector Mixer Measurements
The vector mixer calibration method allows for measurement of mixer transmission complex S-parameters including phase and group delay of the…
Signal Integrity Tips and VNA Measurements eBook from Microwave Journal
Signal integrity addresses the losses and types of signal degradation that can happen along the signal path (channel) between a…
Time Domain Analysis with a CMT VNA
A Vector Network Analyzer (VNA) natively measures complex S-parameters of a device under test (DUT) in the frequency domain mode…
Using a VNA for Power Plane Impedance Analysis
Senior RF Design Engineer Brian Walker at Copper Mountain Technologies was published on Signal Integrity Journal for his article on…
